[slicer-users] Re: Extension Management Wizard VmtkSlicerModulefile & directory conflict on Vista

Daniel Haehn haehn at bwh.harvard.edu
Wed Jan 20 05:27:04 EST 2010


Hi Mohan,

try the newest extension build from yesterday:

http://ext.slicer.org/ext/trunk/11697-win32/

or specifically:

http://ext.slicer.org/ext/trunk/11697%2dwin32/VmtkSlicerModule%2dsvn100%2d2010%2d01%2d19%2dwin32.zip

The libraries you mentioned are included in this one.

HTH,
Daniel

On Wed, 20 Jan 2010 14:59:33 +0530, Madan Rao <rao.lms at gmail.com> wrote:
> Hello Daniel,
> 
> Thanks.
> 
> I made the changes suggested by you and was successful in loading your
> vmtk
> tutorial volume.
> 
> With this setup ( I followed your tutorial), I could not link to the
> Slicer3( I get the error
> vmtkslicermodule not found).
> 
> I notice the following libraries missing in the vmtkSlicerModule you
> provide:
> vtkvmtkITK, vtkvmtkITKTCL,vtkvmtkSegmentation, vtkvmtkSegmentationTCL.
> 
> When I add these from my cygwin build Slicer, I could link to the
Slicer3,
> but
> Slicer3-real crashes with the warning Data Execution Protection etc..
> 
> May be you could provide the missing libraries and I can check them.
> 
> 
> AM Mohan Rao
> 
> 
> 
> On Tue, Jan 19, 2010 at 10:44 PM, Daniel Haehn
> <haehn at bwh.harvard.edu>wrote:
> 
>> Hi Mohan,
>>
>> I ran into this recently as well and figured out the following
>> workaround:
>>
>> On Windows you likely get the following folder structure after
>> installing the VMTK extensions (11591 is the svn revision of my Slicer,
>> probably differs at your place):
>>
>> Slicer3/11591
>>        /VMTKCenterlines/*.py
>>        /VMTKEasyLevelSetSegmentation/*.py
>>        /VMTKVesselEnhancement/*.py
>>        /VmtkSlicerModule (single file)
>>
>> This is wrong. It should like the following:
>>
>> Slicer3/11591
>>        /VMTKCenterlines/VMTKCenterlines/*.py
>>        /VMTKEasyLevelSetSegmentation/VMTKEasyLevelSetSegmentation/*.py
>>        /VMTKVesselEnhancement/VMTKVesselEnhancement/*.py
>>        /VmtkSlicerModule/*.dll *.lib
>>
>> In the Slicer3 directory the original Extension .zip files (f.e.
>> VmtkSlicerModule-svn98-2010-01-06-win32.zip..) exist. So you can easily
>> unzip them by hand and create the correct folder structure.
>>
>> Please tell me if it works for you.
>>
>> Bye,
>> Daniel
>>
>> On Tue, 2010-01-19 at 21:10 +0530, Madan Rao wrote:
>> > Hello,
>> >
>> > When I use Slicer3 Extensions Wizard to download VmtkSlicerModules
>> > (along with other modules):
>> >
>> > There is a file VmtkSlicerModule (with no extension : size 446kb).
>> >
>> > Apparently this file blocks the creation of a folder by the same name
>> > on Windows.
>> >
>> > Hence I get a long list of errors in tcl:
>> >
>> > Error: No files matched glob pattern: "C:/Users/mohan
>> > rao/AppData/Local/Temp/Slicer3/VmtkSlicerModule/*"
>> > while running Slicer3 after the download.
>> >
>> > Is VmtkSlicerModule file the problem in windows?
>> >
>> > AM Mohan Rao
>> > _______________________________________________
>> > slicer-users mailing list
>> > slicer-users at bwh.harvard.edu
>> > http://massmail.spl.harvard.edu/mailman/listinfo/slicer-users
>> > To unsubscribe: send email to
>> slicer-users-request at massmail.spl.harvard.edu with unsubscribe as the
>> subject
>>
>>




More information about the slicer-users mailing list