[slicer-users] FW:Help - DICOM does not load in Slicer 3.6

Saurabh Gupta 402549 Saurabh_402549 at infosys.com
Wed Jul 7 09:26:17 EDT 2010


Hi Vince

I renamed the directory. I even renamed the files to follow sequential order from 001.DCM ... but still it's giving the same error. I can't see any description when I select a file in the Add Volume Selection Box that pops up.

Regards
Saurabh

-----Original Message-----
From: Magnotta, Vincent A [mailto:vincent-magnotta at uiowa.edu] 
Sent: Wednesday, July 07, 2010 6:19 PM
To: Saurabh Gupta 402549; slicer-users at bwh.harvard.edu
Subject: RE: [slicer-users] FW:Help - DICOM does not load in Slicer 3.6

Try renaming the directory that contains the DICOM files. The .dcm extension on the directory may be causing problems.

Vince

-----Original Message-----
From: Saurabh Gupta 402549 <Saurabh_402549 at infosys.com>
Sent: Wednesday, July 07, 2010 5:29 AM
To: slicer-users at bwh.harvard.edu <slicer-users at bwh.harvard.edu>
Subject: [slicer-users] FW:Help - DICOM does not load in Slicer 3.6



From: Saurabh Gupta 402549
Sent: Wednesday, July 07, 2010 3:39 PM
To: 'slicer-users at bwh.harvard.edu'
Subject: DICOM does not load in Slicer 3.6

Hi

I tried adding DICOM files as volume in Slicer 3.6 and it gives this error :-

ERROR: In ..\..\..\Slicer3\Libs\MRML\vtkMRMLVolumeArchetypeStorageNode.cxx, line 330
vtkMRMLVolumeArchetypeStorageNode (18AD5198): ReadData: Cannot read file, fullName = D:/DICOM/subj006reg001.dcm/GE2FVHF4.DCM, number of files listed in the node = 0, the ITK reader says it was able to read 0 files, the reader used the archetype file name of D:/DICOM/subj006reg001.dcm/GE2FVHF4.DCM

Is there a way, I can resolve it ?

Thanks
Saurabh


**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***


More information about the slicer-users mailing list