[slicer-users] About Slicer on Ubuntu 10.04

Ron Kikinis kikinis at bwh.harvard.edu
Wed Oct 6 07:34:22 EDT 2010


Samuele,
Did you try the other font families?
Ron


On 10/6/10 3:49 AM, Samuele Zampini wrote:
> Dear Ron,
>
> as you can see in the images attached, it doesn't matter how big I set the
> font. The menu writings are not clear. I try to set the Ubuntu fonts, too.
> But I'd like to ask Wallace what he means..
> Where should I go and which is the right settings?
>
> Thanks again,
>
> Samuele
>
> On Tue, Oct 5, 2010 at 2:24 PM, <swallace at nmr.mgh.harvard.edu
> <mailto:swallace at nmr.mgh.harvard.edu>> wrote:
>
>     I had a similar problem that was solved adjusting the Ubuntu font
>     settings, in case the Slicer settings aren't sufficient.
>
>
>     On Tue, October 5, 2010 5:41 am, Samuele Zampini wrote:
>      > Dear all,
>      >
>      > I am running 3D Slicer 3.6 on Ubuntu 10.10. The hardware is the
>     following:
>      >
>      > samiam at boltzmann:~$ sudo lspci
>      >>
>      > [sudo] password for samiam:
>      >>
>      > 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory
>     Controller Hub
>      >> (rev 02)
>      >>
>      > 00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express
>     Root Port
>      > (rev
>      >> 02)
>      >>
>      > 00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI
>      >> Controller (rev 02)
>      >>
>      > 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit
>     Network
>      >> Connection (rev 02)
>      >>
>      > 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family)
>     USB UHCI
>      >> Controller #4 (rev 02)
>      >>
>      > 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family)
>     USB UHCI
>      >> Controller #5 (rev 02)
>      >>
>      > 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family)
>     USB2 EHCI
>      >> Controller #2 (rev 02)
>      >>
>      > 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
>      >> Controller (rev 02)
>      >>
>      > 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI
>     Express
>      > Port
>      >> 1 (rev 02)
>      >>
>      > 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family)
>     USB UHCI
>      >> Controller #1 (rev 02)
>      >>
>      > 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family)
>     USB UHCI
>      >> Controller #2 (rev 02)
>      >>
>      > 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family)
>     USB UHCI
>      >> Controller #3 (rev 02)
>      >>
>      > 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family)
>     USB2 EHCI
>      >> Controller #1 (rev 02)
>      >>
>      > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
>      >>
>      > 00:1f.0 ISA bridge: Intel Corporation 82801HH (ICH8DH) LPC Interface
>      >> Controller (rev 02)
>      >>
>      > 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID
>     Controller
>      >> (rev 02)
>      >>
>      > 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus
>     Controller
>      > (rev
>      >> 02)
>      >>
>      > 01:00.0 VGA compatible controller: nVidia Corporation G86
>     [GeForce 8300
>      > GS]
>      >> (rev a1)
>      >>
>      > 03:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
>     IEEE-1394a-2000
>      >> Controller (PHY/Link)
>      >>
>      > samiam at boltzmann:~$
>      >>
>      >
>      > The point is that - as you can see in the picture attached - I
>     can not see
>      > the
>      > menu properly.
>      >
>      > Could you help to fix this?
>      >
>      > Thanks,
>      >
>      > --
>      >
>      >              Samuele Zampini
>      > ____________________________________________________________________
>      >
>      >   .~.
>      >   /V\       L   I   N   U   X
>      >  // \\          I S    T H E
>      >  /(   )\           W A Y
>      >  ^^-^^
>      >  cell phone :  +393473426510       e.mail:
>     samuele.zampini at gmail.com <mailto:samuele.zampini at gmail.com>
>      >  home        :   +390331823927       www:
>     samiam1000.spaces.live.com <http://samiam1000.spaces.live.com>
>      > _______________________________________________
>      > slicer-users mailing list
>      > slicer-users at bwh.harvard.edu <mailto:slicer-users at bwh.harvard.edu>
>      > http://massmail.spl.harvard.edu/mailman/listinfo/slicer-users
>      > To unsubscribe: send email to
>      > slicer-users-request at massmail.spl.harvard.edu
>     <mailto:slicer-users-request at massmail.spl.harvard.edu> with
>     unsubscribe as the
>      > subject
>
>
>
>     The information in this e-mail is intended only for the person to
>     whom it is
>     addressed. If you believe this e-mail was sent to you in error and
>     the e-mail
>     contains patient information, please contact the Partners Compliance
>     HelpLine at
>     http://www.partners.org/complianceline . If the e-mail was sent to
>     you in error
>     but does not contain patient information, please contact the sender
>     and properly
>     dispose of the e-mail.
>
>
>
>
> --
>
>                   Samuele Zampini
> ____________________________________________________________________
>
>    .~.
>    /V\       L   I   N   U   X
>   // \\          I S    T H E
>   /(   )\           W A Y
>   ^^-^^
>   cell phone :  +393473426510       e.mail: samuele.zampini at gmail.com
> <mailto:samuele.zampini at gmail.com>
>   home        :   +390331823927       www: samiam1000.spaces.live.com
> <http://samiam1000.spaces.live.com>
>
>
>
> _______________________________________________
> slicer-users mailing list
> slicer-users at bwh.harvard.edu
> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-users
> To unsubscribe: send email to slicer-users-request at massmail.spl.harvard.edu with unsubscribe as the subject

-- 
Ron Kikinis, M.D.,
Robert Greenes Distinguished Director of Biomedical Informatics
Professor of Radiology, Harvard Medical School
Director, Surgical Planning Laboratory
http://www.spl.harvard.edu/~kikinis



More information about the slicer-users mailing list