[slicer-users] About Slicer on Ubuntu 10.04

Wendy Plesniak wjp at bwh.harvard.edu
Wed Oct 6 07:51:22 EDT 2010


Hi Samuele,
Thanks for the screenshot -- pretty unreadable!
Here's a link for setting fonts on Ubuntu -- not sure if
this will help, but worth a try!

http://www.techotopia.com/index.php/Configuring_Ubuntu_Desktop_Fonts

cheers,
-wen

On Oct 6, 2010, at 3:49 AM, Samuele Zampini wrote:

> Dear Ron,
> 
> as you can see in the images attached, it doesn't matter how big I set the 
> font. The menu writings are not clear. I try to set the Ubuntu fonts, too.
> But I'd like to ask Wallace what he means..
> Where should I go and which is the right settings?
> 
> Thanks again,
> 
> Samuele
> 
> On Tue, Oct 5, 2010 at 2:24 PM, <swallace at nmr.mgh.harvard.edu> wrote:
> I had a similar problem that was solved adjusting the Ubuntu font
> settings, in case the Slicer settings aren't sufficient.
> 
> 
> On Tue, October 5, 2010 5:41 am, Samuele Zampini wrote:
> > Dear all,
> >
> > I am running 3D Slicer 3.6 on Ubuntu 10.10. The hardware is the following:
> >
> > samiam at boltzmann:~$ sudo lspci
> >>
> > [sudo] password for samiam:
> >>
> > 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub
> >> (rev 02)
> >>
> > 00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port
> > (rev
> >> 02)
> >>
> > 00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI
> >> Controller (rev 02)
> >>
> > 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network
> >> Connection (rev 02)
> >>
> > 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> >> Controller #4 (rev 02)
> >>
> > 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> >> Controller #5 (rev 02)
> >>
> > 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> >> Controller #2 (rev 02)
> >>
> > 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
> >> Controller (rev 02)
> >>
> > 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
> > Port
> >> 1 (rev 02)
> >>
> > 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> >> Controller #1 (rev 02)
> >>
> > 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> >> Controller #2 (rev 02)
> >>
> > 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> >> Controller #3 (rev 02)
> >>
> > 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> >> Controller #1 (rev 02)
> >>
> > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
> >>
> > 00:1f.0 ISA bridge: Intel Corporation 82801HH (ICH8DH) LPC Interface
> >> Controller (rev 02)
> >>
> > 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller
> >> (rev 02)
> >>
> > 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller
> > (rev
> >> 02)
> >>
> > 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8300
> > GS]
> >> (rev a1)
> >>
> > 03:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000
> >> Controller (PHY/Link)
> >>
> > samiam at boltzmann:~$
> >>
> >
> > The point is that - as you can see in the picture attached - I can not see
> > the
> > menu properly.
> >
> > Could you help to fix this?
> >
> > Thanks,
> >
> > --
> >
> >              Samuele Zampini
> > ____________________________________________________________________
> >
> >   .~.
> >   /V\       L   I   N   U   X
> >  // \\          I S    T H E
> >  /(   )\           W A Y
> >  ^^-^^
> >  cell phone :  +393473426510       e.mail:  samuele.zampini at gmail.com
> >  home        :   +390331823927       www:   samiam1000.spaces.live.com
> > _______________________________________________
> > slicer-users mailing list
> > slicer-users at bwh.harvard.edu
> > http://massmail.spl.harvard.edu/mailman/listinfo/slicer-users
> > To unsubscribe: send email to
> > slicer-users-request at massmail.spl.harvard.edu with unsubscribe as the
> > subject
> 
> 
> 
> The information in this e-mail is intended only for the person to whom it is
> addressed. If you believe this e-mail was sent to you in error and the e-mail
> contains patient information, please contact the Partners Compliance HelpLine at
> http://www.partners.org/complianceline . If the e-mail was sent to you in error
> but does not contain patient information, please contact the sender and properly
> dispose of the e-mail.
> 
> 
> 
> 
> -- 
>                                                                                          Samuele Zampini
> ____________________________________________________________________
> 
>   .~.                               
>   /V\       L   I   N   U   X    
>  // \\          I S    T H E
>  /(   )\           W A Y
>  ^^-^^
>  cell phone :  +393473426510       e.mail:  samuele.zampini at gmail.com
>  home        :   +390331823927       www:   samiam1000.spaces.live.com
> 
> <large.png><medium.png>_______________________________________________
> slicer-users mailing list
> slicer-users at bwh.harvard.edu
> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-users
> To unsubscribe: send email to slicer-users-request at massmail.spl.harvard.edu with unsubscribe as the subject

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://massmail.spl.harvard.edu/pipermail/slicer-users/attachments/20101006/4f3858d1/attachment.html>


More information about the slicer-users mailing list